选【角钢切角机】就来山东找【天都数控】品质有保证！

产品详情 价格：面议 最小采购量：1 品牌/型号：瑞浦/JGQJ-14 JGQJ-20 重量：1（kg） 产品介绍 液压角钢切角机的详细信息 品牌/型号：瑞浦/JGQJ-14 JGQJ-20 重量：1（kg） 组合机床类型：其他 液压角钢切角机 本机为开式角钢切角、角钢及钢板打字、冲孔多用机，主要用于角钢的切角及打字、冲孔，钢板的打字、冲孔。 本机的切角模为直角双刃口、回转式（手动或电动）多方位切角模、角钢所需切角度的变化，只需调整回转工架即可，而角负有需要转动角度，因此其切角作业占地面积小，切角误差小；本机还具有要字及冲孔系统，若需要打字、冲孔，只要卸下切角模，换上打字或冲孔系统，就可进行打字或冲孔作业。（冲孔模可配单孔、双孔径和多孔径模具）。 This is an open type all-purpose machine for corner cutting of angle steel, angling, print on the armor plate and punching. It is mainly used for corner cutting, print and punching of angle steel, and the print and punching of armor plate. The corner cutting model of this machine is right-angle double-edged, helicoids (manual or electric) all-orientation. It is possible to adjust the helicoids model to meet the change of the cutting angle of the angle steel, ad the angle steel doesn’t need to turn. So the floor space of the corner cutting processing is small, and corner cutting error is little. This machine also possesses the print and punching system. When print and punching are needed, it can be carried through to take down the corner cutting model and fix the print and punching system.(punching model can be collocated with haplopore, diplopore and multiorifice diameter model). 序号Sequence number项目名称 Item name单位UnitJGQJ-14规格 StandardJGQJ -20规格 Standard1压机公称压力Presser nominal pressureKN80010002油缸行程Oil cylinder strokeMm50503行程次数Times of strokeMin-120-2520-254电机功率Power of electric machineryKW11155可切最角钢边长、厚度 Max side length and thickness of sectile angle steelmm140×140×12（单切口）Single-notch200×200×16（单切口）Single-notch6切角模回转角度Turning angle of the corner cutting model ±360°±360°