Wayne Kerr 65120,6540 LCR 电表 阻抗分析仪

　产品参数

WK6500/WK-6500 系列

英国Wayne Kerr 阻抗分析仪 WK6505,6510,6515,6520,6530,6550,65120(取代 WK6540 )测试频率為20Hz~5MHz,~10MHz,15MHz,~20HMz,~30MHz,~50MHz,~120MHz等,采用彩色触控屏幕,可接因特网internet传送测試数据。

电感量测范围0.1nH~100H,电容量测范围0.01p~>1F.测量参数有:L,Q,Z,C,D,R,DCR,ESR,X,Y,B,G,θ等.可”选购”内建100mA直流偏流源DC Bias current及40V直流电压偏压源DC Bias voltage。

具有阻抗扫描图形分析功能:可选择任何可用的量测参数并以频率或AC电压為扫描基准來执行图形扫描並显示结果(可观看頻率响应曲线及饱和谐振奌)以分析零件特性。

WK6500系列是目前市面上高精度仪器"性能价格比"竞争力的产品,也是H/P, Agilent,安捷伦代用机.

规格表

阻抗分析仪 WK6500/WK-6500 (Technical Specifications 6540A)

Measurement parameters

Any of the following parameters can be measured and displayed:

AC Functions

·Capacitance(X) ·lnductance(L) ·Resistance(R)

·Reactance(X) ·Conductance(G) ·Susceptance(B)

·Dissipation Factor(D) ·Quality Factor(Q)

·lmpedance(Z) ·Admittance(Y) ·Phase Angle(0)

Display format

Series or parallel equivalent cicurit.

Test conditions

Frequency range

1 KHz to 120 MHz

Accuracy of set frequency ±0.005%

AC Drive level

10 mV to 1v rms*

200uA to 20 mA rms*

*Varies with frequency

Signal source impedance:50 nominal

DC bias current(optional)

100 mA to DC bias current

40V of DC bias voltage

Mode of operation

Graphical sweep mode

Allows graphical sweep lf any two

Measurenent parameters

Swept parameters:-frequency,drive level or DC bias

Meter mode

Allows the instrument to be used as a standard LCR meter.

Setup data

Up to 20 instrument setups may be stored locally

For each mode.